k8凯发国际

    The voltage control range is ±10V, compliance voltage is ±10V, the maximum current output is ±100mA, and the minimum current resolution can reach 1pA. The EIS frequency range is 10μHz~1MHz.

Features

- Small & light, handheld and convenient

- Easy to install and use

- High accuracy, current resolution can reach to 1pA, and measurement accuracy is 0.1% of the range.

-during outdoor test, a laptop’s USB port can be used for both charging and communicating

- The circuit adopts floating design. Electrochemical parameters of the grounded system can be measured without an isolation transformer.

Thanks to its small size with comprehensive electrochemical functions, it’s typically used for:

- Battery materials’ performance test in a glove box

- Ultra-low detection limit of heavy metal ions for water quality test in environmental protection field

- Low current detection in biosensor thanks to high current accuracy  

- Effective ingredients detection in food and drug industry  

- Outdoor bridge corrosion and soil corrosion measurements

Note: maximum current during experiment doesn’t exceed ±100mA then the handheld potentiostat can be used. If exceeds ±100mA an ordinary size potentiostat with maximum current ±2A should be considered.

Specifications

Size / weight:15 x 9 x 3 (cm), 500g

Communication: USB / Bluetooth

Power supply: USB / built-in Li-ion battery 10AH@3.7V 

Support 2-, 3-or 4-electrode system

Maximum current: ± 100mA

Potential control range: ±10V

EIS frequency range: 10μHz ~ 1MHz

Compliance voltage: ±10V

Current range: 200pA~200mA, 10 ranges

Potential range:±200mV ±2V, ±5V, ±10V

Potential accuracy: 0.1%× full range

Minimum potential resolution: 1mV

Current accuracy: 0.1%× full range

Minimum current resolution: 1pA

Reference electrode input impedance: 10¹³Ω||8pF

AC amplitude: 0~±2.5V

Signal response bandwidth: 1MHz

Max. acquisition rate: 150,000 data points/s

CV and LSV scan rate: 0.001mV~ 10V/s

Electrochemical techniques - CS100ME

Stable polarization

· Open Circuit Potential (OCP)

· Potentiostatic (I-T curve)

· Galvanostatic

· Potentiodynamic (Tafel plot)

· Galvanodynamic (DGP)

Transient Polarization

· Multi Potential Steps

· Multi Current Steps

· Potential Stair-Step (VSTEP)

· Galvanic Stair-Step (ISTEP)

Chrono Method

· Chronopotentiometry (CP)

· Chronoamperometry (CA)

· Chronocaulometry (CC)

Voltammetry

·Linear Sweep Voltammetry (LSV)

· Cylic Voltammetry (CV)

· Staircase Voltammetry (SCV) #

· Square Wave Voltammetry (SWV) #

· Differential Pulse Voltammetry (DPV) #

· Normal Pulse Voltammetry (NPV)#

· Differential Normal Pulse Voltammetry (DNPV) #

· AC Voltammetry (ACV)

· 2^nd harmonic AC Voltammetry (SHACV)

· Fourier Transform AC Voltammetry (FTACV)

# there is correspinding Stripping Voltammetry

Electrochemical Impedance Spectroscopy (EIS)

· Potentiostatic EIS (Nyquist, Bode)

· Galvanostatic EIS

· Potentiostatic EIS (Optional freq.)

· Galvanostatic EIS(Optional freq.)

· Mott-Schottky

· Potentiostatic EIS vs. Time (Single freq.)

· Galvanostatic EIS vs. Time (Single freq.)

Corrosion Measurements

· Potentiodynamic (Tafel plot)

· Cyclic polarization curve (CPP)

· Linear polarization curve (LPR)

· Electrochemical Potentiokinetic Reactivation (EPR)

· Electrochemical Noise (ECN)

· Zero resistance Ammeter (ZRA)

Battery test

· Battery Charge and Discharge

· Galvanostatic Charge and Discharge (GCD)

· Potentiostatic Charging and Discharging(PCD)

· Potentiostatic Intermittent Titration Technique(PITT)

· Galvanostatic Intermittent Titration Technique(GITT)

• Brochure- CS100ME portable potentiostat with eis